Guest Book
Please use our guest book to leave comments for all to see.
| Time/Date | 12:09:43 PM, 8/29/00 |
| Name | DANNY PEPE |
| Location | |
| HAWAIIKID@AOL.COM | |
| Comments | I HAVE 1953 ADLER M200.I AM LOOKING FOR 2 PISTONS,RINGS ,CONNECTING PINS AND CLIPS PLEASE SOMEONE HELP ME THANK YOU |
| Time/Date | 10:22:12 AM, 9/3/00 |
| Name | Joachim Schlechte |
| Location | |
| meridian@access.net.au | |
| Comments | Very interesting site. Thanks for the address. My friend has it bookmarked for future reference. |
| Time/Date | 3:33:33 AM, 9/29/00 |
| Name | Rolf Otto |
| Location | |
| Rolf-Otto@t-online.de | |
| Comments | Hi Don, super Adler-Seite - wirklich sehr gut gelungen ... einen Link zu dir werde ich bei mir einbauen. |
| Time/Date | 2:26:48 AM, 10/14/00 |
| Name | E.Bley, USA |
| Location | |
| ebley49095@aol.com | |
| Comments | Gute Seite von `way down under`.Macht weiter so. Als Ex-Adler Mitarbeiter 1955-1957 restauriere ich hier in Florida, von M100 bis Favorit. Habe etliche MB 250er 2 Vergaser Gehaeuse die ich gerne gegen die standard 1 Vergaser Version tauschen moechte. |
| Time/Date | 5:57:36 AM, 10/23/00 |
| Name | Michael Liebig, Germany |
| Location | |
| meikel-adler@t-online.de | |
| Comments | Hallo Don, and all ADLER owner`s `way down under`. I am very pleased to see the great progress on your site since we got in contact first with Rowan, Socrates and you by end of 1999. Go ahead in growing the contacts and links. Just today I have updated the ADLER Club Information (german part for the moment)but Australia is not listed in the international list, because there are no `Australien` club members joining the german club. When can we expect the foundation (like the Dutch) of your own ADLER Club of Australia ? Anyhow, don`t bother about it. Wishing all of you lot`s of fun in the sun at a speed limit of 100 km/h, when we in Europe freeze our budd off while riding motorcycle in autum and winter here. Michael |
| Time/Date | 9:37:24 PM, 11/13/00 |
| Name | graeme boyle |
| Location | Australia |
| grboyle@murraytel.com.au | |
| Comments | Ihave a 250 engine which has early yamaha pistons and rods from memory with centre plug heads and did have two amal tt carbies that appeared to be non genuine amal(rough sand cast, no i.d)these carbs were alcohol jetted and engine had home made reed valves fitted inside long manifolds adapting to twin carbs. Exhausts look like factory type expansion chambers. I think engine was used in hill climbs.Not interested in selling but i could get more info if anyone needs it. |
| Time/Date | 8:07:10 AM, 11/21/00 |
| Name | Michael Liebig |
| Location | Wiesbaden, Germany |
| meikel-adler@t-online.de | |
| Comments | Rolf Bungert (Germany) is searching for ADLER Sprinter Parts: frame, frontfork, headlight, toolbox, chaincase actually any available Sprinter parts. Further for a ADLER 6 Days exhaustpipe (the pipe not the rear muffler) or techn. drawing. Rolf Bungert can be reached by fax in germany +49-7445-3297 or send e-mail to me. Rolf has for sale: Watercooler unit for ADLER RS and `high` cylinder heads newly manufactured. Further Rolf is selling a red ADLER cross. No price published, upon negotiation. Regards Michael Liebig for and on behalf of Rolf Bungert |
| Time/Date | 4:59:57 AM, 12/28/00 |
| Name | Dirk Drechsle |
| Location | Inzlingen / Germany |
| Dirk.Drechsle@t-online.de | |
| Comments | Hi there `Down under` ! You've built a really great site ! Me and my father are currently restoring a MB250 and we are desperatly searching for a tool box cover (the thing with the lock in it) I know it's crazy for us germans to ask for it in Australia, but you never know until you tried ! Regards Dirk |
| Time/Date | 8:28:27 AM, 2/13/01 |
| Name | Bernie Stevens |
| Location | West Sussex, UK/GB |
| leemus@leemus.freeserve.co.uk | |
| Comments | Dear Don, Found the Adler website through my daughters. I own a complete original Adler MB 250 1954, I brought it in 1991 from a Mr Colin Seeley, who for those who may not be old enough to know,was world side car champion in the early 50`s. He brought it at a auction a few months earlier just because he liked the style and shape of it, also he remembered friends racing them in the 50`s. The Adler was featured in an article called `Authentic and Unrestored` in `Classic Motorcycle` in February 1996. Through my interest in German motorcycles, and Adler in particular, I have put together a Adler register here in the UK. At the moment I have 12 MB 250`s (including the first one to be imported into this country, which was a private purchase from the Frankfurt factory in 1954), 6 MB 250 favorit, 1 M 200, 1 MB 201. Also a person who owns about 12 various machines but none are on the register. Well that`s the Adler situation in the UK. Finally could I suggest, if possible, that frame and engine numbers could be shown so that it could be possible to find the oldest and youngest Adler`s around, also I have a list of Adler`s in a European register, would you Adler owner`s in Aussie land like to know about it, if so let me know. Safe riding, Bernie. |
| Time/Date | 7:54:07 PM, 4/10/2001 |
| Name | Kevin Wilson |
| Location | Adelaide South Australia |
| wklwil@hotmail.com | |
| Comments | Searching for some parts for Adler swing arm Sprinter,MBS 250. Looking for tool box, chain guard, and mudguards. Email or phone 0883526205 |
| Time/Date | 12:58:31 PM, 4/17/2001 |
| Name | Fernando Garetto |
| Location | Santiago, Chile |
| f@garetto.cl | |
| Comments | Congratulations, your site is very good. I need help for restore my M100 of 1957, serial 104782 . I will be very happy if can contact me and help me. |
| Time/Date | 6:15:12 AM, 4/19/2001 |
| Name | mike waugh |
| Location | tynemouth uk |
| thewoffs@talk21.com | |
| Comments | hi fellow enthusiasts.my bother & i have been involved with mb & rs models since early sixties.always interested in anything adler |
| Time/Date | 2:07:31 AM, 8/5/2001 |
| Name | Mads Madsen |
| Location | Denmark |
| sahl@maskinteknik.dk | |
| Comments | Hello fellows !! i own a adler m200 and i am looking for a original Amal carburretter for it. do yuo got any, or can yuo tell me where to get it i will be glad |
| Time/Date | 4:24:47 AM, 3/27/2002 |
| Name | Roland |
| Location | Bad Krozingen - Germany |
| mail@motorrad-oldies.com | |
| Comments | Hello.... Gratulation for your nice Page. I`ve make your Link on our site http://www.motorrad-oldies.com Cu Roland |
| Time/Date | 3:52:56 PM, 4/5/2002 |
| Name | Hans Duffner |
| Location | 78120 Furtwangen, Germany |
| duhans@web.de | |
| Comments | Mit Erstaunen und großem Interesse habe ich Ihre website entdeckt. Herzlichen Glückwunsch !!! |
| Time/Date | 1:36:14 AM, 4/10/2002 |
| Name | Johnny H a h n |
| Location | Weddinghusen/Germany |
| Johnny-Hahn@gmx.de | |
| Comments | Mit Freude habe ich als Adler-Fahrer (M 100, 1953) diese Website entdeckt und gratuliere den Machern. Allen Motorradfahrern allzeit gute Fahrt ! |
| Time/Date | 5:16:09 AM, 4/26/2002 |
| Name | Matthias Ritt |
| Location | Rottenburg |
| Matthias.Ritt@t-online.de | |
| Comments |
Have a look on www.adler-service.de ed.. Matthais could
you please resend your email address, the one you supplied dosn't apear
to work and I am trying to contact you. |
| Time/Date | 10:50:15 PM, 4/28/2002 |
| Name | John Cousins |
| Location | Inverness, Scotland |
| jacousins@ouvip.com | |
| Comments | I have an MB200 engine and I cant get the big gearwheel off the gearbox shaft. I have tried a 10 Tonne hydraulic puller without effect. Any ideas anyone? Also I cant make out how the `hydraulic` dampers in the plunger suspension work. Are they supposed to be lubricated in some way? Also, the book recommends oil for lubricating the plungers, but it leaks out very quickly. I have stripped two sets of plungers recently and they had both been packed with grease. |
| Time/Date | 3:16:08 PM, 5/10/2002 |
| Name | john jemes |
| Location | nigeria |
| cibaration@yahoo.com | |
| Comments | i like your product |
| Time/Date | 2:00:20 AM, 6/12/2002 |
| Name | anthony johnstone |
| Location | saigon |
| ajohns33@postoffice.csu.edu.au | |
| Comments | I`m in tears, Here in Saigon I found an mb250 in mint original nick, took it for a burn - went like a dream. Came back the next day with my money only to find it had been sold to a chap who was sensible to bring the money with him. Bugger it!!!! Cn imma |
| Time/Date | 3:02:54 AM, 7/7/2002 |
| Name | John Cousins |
| Location | Inverness, Scotland |
| jacousins@ouvip.com | |
| Comments | Further to my note above of 4/28/2002, I did have a reply, but owing to a disasterous computer crash, I have lost all my e-mail files. Would the person who replied, please repeat the message. |
| Time/Date | 5:06:51 PM, 7/7/2002 |
| Name | Gerd Stegner |
| Location | 66504 Bottenbach |
| st-drums@t-online | |
| Comments | Beautiful site!!! A friend of mine just called me for help.His father in law died a few month ago .He had a Adler M250 before his first car .He dissasembled it complete in the end 50s and brougt the parts under the roof in his house.Now 40 years later my friend brought the parts down in the garage and we want to build a motorcycle from this parts.what we need is a electric diagram and a drawing of the parts because we want to see if its complete or not. Can sombody help with this drawings? |
| Time/Date | 2:55:51 AM, 7/19/2002 |
| Name | Rocky Rockwell |
| Location | western Michigan, USA |
| itsrockyagain@webtv.net | |
| Comments | MB250 complete, outstanding condition. previously brought to the US from europe by a man from San Diego, California. it was fitted with a beautiful Royal sidecar. the man from San Diego sold it to a friend of mine from San Diego, who sold the sidecar separate from the MB250, he then sold the motorcycle to me. I brought it with me when I moved back to Michigan. It is finished in black with gold pin stripes. When I get some photos scanned, I`ll submit them for your viewing pleasure. any comments or questions, contact me through my email address. thanks for the great website. RR |
| Time/Date | 4:04:17 AM, 7/22/2002 |
| Name | Tony Pearce |
| Location | Wakefield. West Yorkshire |
| tony@pearcetap.freeserve.co.uk | |
| Comments | I had a second-hand Adler scooter in the early 1960s, yet I have never heard or read about Adler machines until today. My scooter was a 98cc machine with 12 volt starter and 6 volt lighting, it was blue in colour and with 2 seats. I can`t remember the model or anything else about it. I would love a photograph if anyone could help. regards Tony. |
| Time/Date | 3:49:12 AM, 9/3/2002 |
| Name | Martin Ruoff |
| Location | Leonberg Germany |
| Martin.Ruoff@ial-international.com | |
| Comments | I was completely surprised to find an Adler-club down under. I had several Adlers in the seventies (MB 250 single carburettor tuned up to 25 HP, MB 250 own construction twin carburettors 30 HP) The Picture on yr photo side of twin carburettors telescopic fork in racing trim shows a construction of Heinz Odoerfer of Nuremberg/Germany of the seventees. He was the last guy in Germany professionally restoring and developing Adlers (production of own motor parts and special crankshafts with high performane bearings. If somebody needs more information, pls contact me. |
| Time/Date | 1:09:01 AM, 12/28/2002 |
| Name | M.Agterberg |
| Location | Holland |
| gielo@hetnet.nl | |
| Comments | My MB250 is reddy after two jears workig in the livingroom (a love my wife) and he looks like brand new. We like your site and will vissit this more. There is commning up a Dutch Adler site when I know more we get you a e-mail. Regards Chiel. |
| Time/Date | 6:42:32 AM, 1/12/2003 |
| Name | C. Mauermann |
| Location | Germany |
| christoph.mauermann@web.de | |
| Comments | My father and I do own two Adler motorcycles (1xMB250 with sidecar of Steib, 1xMB250 sprinter). Both in good condition and ready to be driven in sunshine. I am completely surprised to find a site of ADLER-fans in down under. I will tell my father about this site and try hard to translate the technical english. Thanx for the nice moments and who knows maybee I can get photos of our beloved bikes to post it on your site. |
| Time/Date | 11:57:16 AM, 3/4/2003 |
| Name | Daniel Dargay |
| Location | Weaetherly, Pa. United States |
| eiservices@hazleton.net | |
| Comments | I Was just reminising about the Adler MB250 that I had when I was a teenager in the late 50`s. It was a 1956 model that I bought used from a friend who also had a BMW with side car. I wish I would have kept that bike. Bike was sold to another friend and he traded it on a new Honda in 1962. I never knew what happened to it after that. How I wish I would have held on to it, but as they say, hind sight is 20-20. Enjoyed visiting the sight.Will visit again |
| Time/Date | 11:21:58 AM, 28/05/2003 |
| Name | carlos pebe |
| Location | Lima- Peru |
| carlospebe965@hotmail.com | |
| Comments | hola amigos contento de compartir una aficion por las adler consegui una 100cc la cual la estoy restaurando en la proxima semana pondre una foto para que me den sus comentarios y apoyo con datos respecto a este modelo. gracias |
| Time/Date | 11:05:13 PM, 5/28/2003 |
| Name | Bob Dixon |
| Location | Oxford, England. |
| bobd@kubota.co.uk | |
| Comments | Does anyone have information on rebuilding the MB200 gearbox and adjusting the clutch via the shims please? After a bottom end rebuild, the engine ruins beautifully but the gearchange is awful. Help much appreciated and any costs repaid |
| Time/Date | 10:10:04 PM, 6/11/2003 |
| Name | sulkar |
| Location | Estonia |
| moto.bike@mail.ee | |
| Comments | Really good adler club web But what to you think about my motorcycles web fttp://www.zone.ee/motorcycles |
| Time/Date | 7:16:18 PM, 7/11/2003 |
| Name | Jommi Saarinen |
| Location | FINLAND |
| jommi.saarinen@vianor.fi | |
| Comments | Hello! I have opportunity to bye an ADLER MOTOCROSS. Could someone tell, what is real price for that. The bike is in good kondition.Thank You |
| Time/Date | 6:39:42 AM, 9/22/2003 |
| Name | Walter Lenz |
| Location | Hohenöllen / Germany |
| NA | |
| Comments | Hello, Been very surprised finding ADLER Motorcycle-activity in Australia. As a child i lived for 6 years in Australia near Woolonggong, NSW. My ADLER is a MB201 1-Cylinder from 1954 ( my Birthjear ). You hava a lot of good information in Your site. |
| Time/Date | 6:10:30 PM, 10/12/2003 |
| Name | John Marr |
| Location | Summerland Point. NSW |
| john.marr.4@bigpond.com. | |
| Comments | I HAVE A BSA special built in the 1960,S and it has been fitted with Adler front forks.It may be usefull to someone who is restoring a bike PH. O249762221 |
| Time/Date | 12:03:20 AM, 11/26/2003 |
| Name | John Cousins |
| Location | Inverness, Scotland |
| jacousins@beowulf1935.fsnet.co.uk | |
| Comments | I`ve changed my E-mail address to the above. I am just back from the Mannheim Autojumble - very interesting but very expensive. Whilst in Germany I called on Herr Strohmenger at the Adler Fach Museum in Weilerwist to pick up a crankshaft he had reconditioned for me. I was very impressed both with the workmanship and specification of the reconditioned crankshaft and with the exhibits in his museum. Of particular note are an `air bike` which is an MB250 converted to operate on a high wire, and a new Motocross. There are many other exhibits, and I should think that most models are represented. Anyone visiting Germany should make the attempt to call. Herr Strohmenger does not speak a lot of English, but his wife is available for translation. |
| Time/Date | 10:46:05 PM, 12/12/2003 |
| Name | Bruno Nuñez |
| Location | Peru -South America |
| brunofanm@hotmail.com | |
| Comments | hi yesterday i recover the adler mb 205 of my grandfather , I dont know nothing about motorcycles , and maybe y will sell it if someone can give me advise for that , i can send a picture by mail . thanks |
| Time/Date | 12:07:49 AM, 1/01/2004 |
| Name | obis |
| Location | uk |
| obis@yahoo.com | |
| Comments | i am obis model that I bought used from a friend who also had a BMW with side car. I wish I would have kept that bike. Bike was sold to another friend and he traded it on a new Honda in 1962. I never knew what happened to it after that. How I wish I would have held on to it, but as they say, hind sight is 20-20.~~Enjoyed visiting the sight.Will visit again mugu |
| Time/Date | 6:37:32 AM, 2/1/2004 |
| Name | Darren Edwards |
| Location | King's Lynn |
| darren.edwards9@btopenworld.com | |
| Comments | i had to visit your site as my dad had an adler back in the 60`s.he bought it from an american ,i believe who was working at raf sculthorpe in norfolk.he thinks it was a 52 year model,so i have been trying to get as many photo`s of the cycles as possible.thanks for the site and your help.all the best for the future Darren. |
| Time/Date | 7:11:45 AM, 20/02/2004 |
| Name | Michelle |
| Location | Sydney, Australia |
| michelle.quinn@commerce.nsw.gov.au | |
| Comments | I am trying to contact ex-pat Australian `Roderick` (tall fair-haired & 39yrs old) formerly of West Pennant Hills, NSW who now lives with sister in Wakefield & works for BT I have lost his business contact details. If friends or colleagues read, please forward my message I will visiting cousins in Bradford soon not far from Wakefield & would like to contact & would appreciate genuine assistance -- cheers |
| Time/Date | 3:26:01 PM, 3/17/2004 |
| Name | ronye |
| Location | Vancouver canada |
| krakr13@hotmail.com | |
| Comments | Hi: I am in need of a headlight for my 1982 Yamaha Beluga 80cc Scooter. Would anyone be able to help me? From what I understand they are 5 volt lamps. Thanks. ronye |
| Time/Date | 10:12:44 AM, 24/03/2004 |
| Name | Dragan |
| Location | Yugoslavia (Becej) |
| branko@soyaprotein.com | |
| Comments | I have ADLER M 200 from 1954 an i would like to sell it!What is a real price? |
| Time/Date | 11:57:59 AM, 7/8/2004 |
| Name | Vince Bauer |
| Location | Bundaberg, QLD,Australia. |
| Comments | Hi Don, It will surprise you to know that I have an Adler 1954 MB250 (complete) with only 11000 miles on the clock, the original service manual (with all service coupons still in tact) and the original workshop manual which was only issued to dealers. It was purchased new from Folks Round & Murchie’s here in Bundaberg and I am about the third or forth owner. I am looking forward to restoring it when I have more time and money but at the moment I am researching all areas to compile as much information on the MB250 as I can from technical information to pictures and media articles. So there are still some bikes around that can pop out of the woodwork. Regards, Vince. |
| Time/Date | 12:01:26 PM, 7/16/2004 |
| Name | David Spick |
| Location | Argentina |
| david_spick@yahoo.com | |
| Comments | Great site. Have just found and Adler bicycle. Does anyone have any contact with bicycle retorers? |
| Time/Date | 9:40:51 PM, 7/31/2004 |
| Name | Faber-Motorradtechnik |
| Location | D-56856 Zell/Mosel |
| ktm-faber@t-online.de | |
| Comments | Hallo Adler-Freunde, suche für einen Bekannten einen Adler 250ccm Wassergekühlten Motor. Zustand Egal! Habe Bilder von einem Kpl.Adler-Sportaufbau! www.ktm-faber.de www.mz-faber.de |
| Time/Date | 1:07:44 PM, 8/9/2004 |
| Name | Gary |
| Location | Fort Worth, Texas, USA |
| gbunt@excite.com | |
| Comments | I once owned two Adlers, one running and one for parts, both 250 cc. I sold them and bought Bultacos which I still ride. My understanding is that Yamaha bought the Adler design when Yamaha started up. Is this true? |
| Time/Date | 11:25:09 PM, 8/30/2004 |
| Name | bernie stevens |
| Location | west sussex G B |
| berniefstevens@hotmail.com | |
| Comments | update.please take note of new e mail address. |
| Time/Date | 10:43:47 AM, 10/20/2004 |
| Name | João Paulo |
| Location | Portugal |
| jpag@clix.pt | |
| Comments | Need information and pictures about the bicycle `Adlerwerke Frankfurt M 107` Thank you JP |
| Time/Date | 6:26:22 PM, 12/26/2004 |
| Name | Kari Eskolin |
| Location | Finland |
| kari.eskolin@luukku.com | |
| Comments | Hello my bike is adler mb 250s 1955. I need carburator. |
| Time/Date | 6:51:03 AM, 1/5/2005 |
| Name | Geoff Robb |
| Location | Valbonne, France |
| geoff.robb@free.fr | |
| Comments | Back in 1962, I owned an Adler 250 1956/7(?) for about 3 months, before I had an accident and gave up motorcycling. I also had Two Zundapps - 201S and 200S, but in my opinion the Adler was the better bike with powerful smooth acceleration, good roadholding and it was also a marvel of German engineering. |
| Time/Date | 7:53:35 PM, 1/02/2005 |
| Name | banu subagyo |
| Location | yogya, indonesia |
| bsubagyo@oxfam.or.id | |
| Comments | This week the total restoration of my Adler M-125 will be completed. I will ride on a black beautiful M-125 which now has been CDI-ed, 12 volt battery, fully new chromed. I will prepare a picture of this bike. Are you interested to buy? |
| Time/Date | 5:53:12 AM, 2/13/2005 |
| Name | romeo pocrnic |
| Location | nova raca/croatia |
| romeo.pocrnic@bj.htnet.hr | |
| Comments | Hello, I need pictures and tehnical information for my adler rs 250 from helmut hallmeier. |
| Time/Date | 6:59:20 PM, 22/02/2005 |
| Name | banu |
| Location | yogya, Indonesia |
| banusubagyo@hotmail.com | |
| Comments | It is surprised, I found many friends as Adler motor owners. I have a black-beautiful Adler M-125, which completely restored for daily riding from my home to my office v.v. Salute!! |
| Time/Date | 3:40:34 AM, 3/14/2005 |
| Name | Siegfried Wegat |
| Location | Hamburg/Germany |
| Swegat@aol.com | |
| Comments | I have a black/gold Adler M-200 in 1956. Ich bin sehr traurig, dass ich sie nicht mehr habe. |
| Time/Date | 3:29:16 PM, 5/16/2005 |
| Name | John |
| Location | Houston |
| john_mail1975j@hotmail.com | |
| Comments | Verynicesite.Willsurevisitagain. |